Long days will feel shorter with the amazingly comfortable MyRIDE® suspension system on Toro® Z Master® Professional 6000 Series 152.4 cm (60") mower. The fully suspended, adjustable operator platform isolates bumps and vibrations so you don’t feel the rough terrain. It’s the Toro toughness you expect with a ride you won’t believe.
This 152.4 cm 6000 series model features a 31 hp Kawasaki® V-Twin 999 cc engine, TURBO FORCE® deck and our patented adjustable discharge chute. The unitised pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points.
72961 model shown with 72" deck
- MyRIDE® Suspension System
The suspended operator platform allows up to 9 cm of travel (depending on model) and reduces impacts, bumps and vibrations. Easily and quickly adjust rear shock ride settings to personal ride preferences, without tools!
- Exclusive TURBO FORCE® Deck
High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
- 7-Gauge, High-Strength Steel
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
- A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
- Deluxe Handcrafted Seat with Arm Rests
Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
- Rubber Discharge Chute
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
- Smarter design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 6 mm, allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
- Patented Adjustable Baffle
Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximise discharge velocity.
- Smooth, Powerful Response
The new unitised pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
- Operator Information Center
The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
- Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
- Cast Aluminum Spindle
Cools quickly for enhanced durability and performance.
31 HP* (23.12 kw) Kawasaki® FX 921cc
Petrol 45 litre single-point fill
|Adjustable Discharge Baffle||
Heavy-Duty Canister Air Cleaner
|Blade Tip Speed||
18,500+ ft/min (5,640 m/min)
1/4" (6 mm) thick heat-treated steel
7.6 cm x 3.8 cm tubular steel
33 cm x 16.5 cm - 15.2 cm flat-free semi-pneumatic
80-Grade 7-Gauge 152 cm (60") TURBO FORCE® w/bull-nose bumper
Hydraulic unitised pumps and wheel motors
61 cm x 30.5 cm - 30.5 cm
19 km/h forward
|Height of Cut||
2.5 - 14 cm in 6 mm increments
MyRIDE® Suspension System
1 Center / 2 Rear
Qty 4, 2.5" 3-D isolation mounts
Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
5 point adjustment on rear shocks
Greaseless ball bearings
22.9 cm diameter cast aluminium
4 cm dia. levers; adjustable
5 years or 1,400 hours
3 years Engine
*The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.
*See your certified Toro dealer for full details on warranties.