Z Master 5000 Series Rear Discharge 60" (152 cm) (72921)

Z Master 5000 Series Rear Discharge 60" (152 cm) (72921)

Z Master 5000 Series Rear Discharge 60" (152 cm) (72921)

Regular price $27,199.00
  • Secure payments
Tax included.

Z Master 5000 Series mowers offer rear discharge decks for increased productivity in taller grass. These EFI models also use up to 25% less fuel than equivalent non-EFI mowers. The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds. Clippings are dropped within the path of the mower, saving time and cleanup.

The Tweel Turf Tyres means no air pressure to maintain, no flat tyres, no compromises. Extra long wear life two to three times that of a pneumatic tyre at equal tread depth.



  • Michelin® X® Tweel® Turf Tyres
    No air pressure to maintain, no flat tyres, no compromises. Get extra long wear life two to three times that of a pneumatic tyre at equal tread depth.

  • 7-Gauge, High-Strength Steel
    The TURBO FORCE® deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

  • Crisp Cut with Precision Blades
    (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

  • Deluxe Suspension Seat
    Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.A Flat

  • Smarter design in a bull-nose bumper
    7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimise blowout of debris and dust. The bottom, leading edge of the deck is raised 6 mm (1/4"), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and autumn clean-up also is significantly reduced.

  • Smooth, Powerful Response
    The new unitised pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.

  • Operator Information Centre
    The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.

  • Folding Rollover Protection System ROPS
    A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

  • Cast Aluminium Spindle
    Cools quickly for enhanced durability and performance.




25 HP* (20 kw) Kohler® Command Pro EFI 747cc

Fuel Capacity

Petrol 45.4 litres

Cutting Width

152.4 cm (60")

Adjustable Discharge Baffle


Air Filter

Heavy-Duty Canister Air Cleaner



Blade Tip Speed

5638.8 m/min (18,500+ ft/min)

Caster Tyres

33 cm x 16.5 cm – 15.2 cm (13" X 6.5" – 6") Flat-Free Semi-Pneumatic



Cup Holder


Deck Design

80-Grade 7-gauge 152.4 cm (60") TURBO FORCE® Rear Discharge w/ bull-nose bumper

Discharge Chute


Drive System

Unitised Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)

Drive Tyres

Airless radial 60.96 cm (24") Michelin X Tweel Turf Tyres

Ground Speed

16.1 km/h forward 

Height of Cut

2.5 cm x 14 cm by 6 cm increments

Number of Blades


Hour Meter


Hydraulic Fluid

Premium synthetic




Folding; standard


Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent

Spindle Bearings

Greaseless ball bearings

Spindle Housing

22.9 cm (9") diameter cast aluminium

Steering Controls

4.1 cm (1-5/8") diameter grips; adjustable, dampened


576.5 kg


5 years/1200 hours limited warranty

*See your certified Toro dealer for full details.


*The gross horsepower of these engines was laboratory rated by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.



  • Light Kit
    The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.
    Part # 116-1154 – 5000 Series

  • Optional Blades
    In addition to the high sail blade, which comes standard on Z Master® 5000 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

  • Recycler® Mulching Kits
    Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.
    *Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.

  • Roller Striping Kit
    Roller striping kit is easily installed and provides a premium "stadium" after-cut appearance.

  • Toro Z Stand™
    Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

More from Mowers
52" (132.1 cm) GrandStand® MULTI FORCE® (72529)
60" (152 cm) GrandStand® MULTI FORCE® (72523)
48" (121.9 cm) Z Master® 8000 Direct Collect Z (74312)
42" (106.7 cm) Z Master® 8000 Direct Collect Z (74315)
60" (152.4 cm) Z Master® 6000 EFI with Horizon™ Technology and E-Gov (72946)
52" (132.1 cm) GrandStand® (72505)