Z Master 5000 Series mowers offer rear discharge decks for increased productivity in taller grass. These EFI models also use up to 25% less fuel than equivalent non-EFI mowers. The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds. Clippings are dropped within the path of the mower, saving time and cleanup.

The Tweel Turf Tyres means no air pressure to maintain, no flat tyres, no compromises. Extra long wear life two to three times that of a pneumatic tyre at equal tread depth.

 

Features

• Michelin® X® Tweel® Turf Tyres
  No air pressure to maintain, no flat tyres, no compromises. Get extra long wear life two to three times that of a pneumatic tyre at equal tread depth.
  
  
• Exclusive TURBO FORCE® Deck
  High-capacity TURBO FORCE® decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE® decks can be fine-tuned in order to conquer changing turf conditions.
  
  
• 7-Gauge, High-Strength Steel
  The TURBO FORCE® deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  
  
• A Flat Crisp Cut with Precision Blades
  (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  
  
• Deluxe Suspension Seat
  Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
  
  
• Smarter design in a bull-nose bumper
  7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 6 mm (1/4"), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  
  
• Cast Aluminium Spindle
  Cools quickly for enhanced durability and performance.
  
  
• Smooth, Powerful Response
  The new unitised pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
  
  
• Patented Adjustable Baffle
  Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximise discharge velocity.
  
  
• Operator Information Centre
  The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
  
  
• Folding Rollover Protection System ROPS
  A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

 

Specifications

 

Engine	26.5 hp* (20 kw) Kohler® Command Pro EFI 747cc
Fuel Capacity	Petrol 45.4 litres
Adjustable Discharge Baffle	Standard
Air Filter	Heavy-Duty Canister Air Cleaner
Armrests	Standard
Blade Tip Speed	5638.8 m/min (18,500+ ft/min)
Blade Type	.204” (.5 cm) heat-treated steel
Carrier Frame	7.6 cm x 3.8 cm x 10 gauge (3" x 1.5" x 10 gauge)
Caster Tyres	33 cm x 16.5 cm – 15.2 cm (13" X 6.5" – 6") Flat-Free Semi-Pneumatic
Cup Holder	Standard
Deck Design	80-Grade 7-gauge 182.9 cm (72") TURBO FORCE® Rear Discharge w/ bull-nose bumper
Discharge Chute	Rubber
Drive System	Unitised Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)
Drive Tyres	Airless radial 60.96 cm (24") Michelin® X® Tweel® Turf Tires
Ground Speed	16.1 km/h forward
Height of Cut	2.5 cm x 14 cm by .6 cm increments
Number of Blades	3
Hour Meter	Standard
Hydraulic Fluid	Premium synthetic
ROPS	Folding; standard
Seat	Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Spindle Bearings	Greaseless ball bearings
Spindle Housing	22.9 cm (9") diameter cast aluminium
Steering Controls	4.1 cm (1-5/8") diameter grips; adjustable, dampened
Weight	605.5 kg
Warranty	5 years/1200 hours limited warranty *See your certified Toro dealer for full details.
Disclaimer	*The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

 

Accessories

• Light Kit
  The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.
  Part # 116-1154 – 5000 Series
  
  
• Optional Blades
  In addition to the high sail blade, which comes standard on Z Master® 5000 Series mowers, additional 1/4" (6 mm) blades are available to match regional and seasonal mowing conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  
  
• Recycler® Mulching Kits
  Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*.
  *Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.
  
  
• Roller Striping Kit
  Roller striping kit is easily installed and provides a premium "stadium" after-cut appearance.
  
  
• Toro Z Stand™
  Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.